Image source: The Motley Fool.
Stratasys (SSYS -0.58%)
Q1 2024 Earnings Call
May 29, 2024, 5:00 p.m. ET
Contents:
- Prepared Remarks
- Questions and Answers
- Call Participants
Prepared Remarks:
Operator
Greetings, and welcome to the Stratasys first quarter 2024 earnings call. At this time, all participants are in a listen-only mode. A brief question-and-answer session will follow the formal presentation. [Operator instructions] As a reminder, this conference is being recorded.
It is now my pleasure to introduce your host, Yonah Lloyd, chief communications officer and vice president of investor relations. Thank you. You may begin.
Yonah Lloyd -- Vice President, Investor Relations and Chief Communications Officer
Good afternoon, everyone, and thank you for joining us to discuss our 2024 first quarter financial results. On the call with us today are our CEO, Dr. Yoav Zeif; and our CFO, Eitan Zamir. I would like to remind you that access to today's call, including the slide presentation, is available online at the web address provided in our press release.
In addition, a replay of today's call, including access to the slide presentation, will also be available and can be accessed through the investor relations section of our website. Please note that some of the information you will hear during our discussion today will consist of forward-looking statements, including, without limitation, those regarding our expectations as to our future revenue, gross margin, operating expenses, taxes, and other future financial performance, and our expectations for our business outlook. All statements that speak to future performance, events, expectations, or results are forward-looking statements. Actual results or trends could differ materially from our forecast.
For risks that could cause actual results to be materially different from those set forth in forward-looking statements, please refer to the risk factors discussed or referenced in Stratasys' annual report on Form 20-F for the 2023 year. Please also refer to our operating and financial review and prospects for 2023 and for the first quarter of 2024, which are included as Item 5 of our annual report on Form 20-F for 2023 and in Exhibit 99.2 to the report on Form 6-K that we are furnishing to the SEC tomorrow, respectively. Please also see the press release that announces our earnings for the first quarter of 2024, which is attached as Exhibit 99.1 to a separate report on Form 6-K that we are furnishing to the SEC today. Our reports on Form 6-K that we furnish to the SEC on a quarterly basis and throughout the year provide updated current information regarding our operating results and material developments concerning our company.
Stratasys assumes no obligation to update any forward-looking statements or information which speak as of their respective dates. As in previous quarters, today's call will include GAAP and non-GAAP financial measures. The non-GAAP financial measures should be read in combination with our GAAP metrics to evaluate our performance. Non-GAAP to GAAP reconciliations are provided in tables in our slide presentation and today's press release.
I will now turn the call over to our chief executive officer, Dr. Yoav Zeif. Yoav?
Yoav Zeif -- Chief Executive Officer
Thank you, Yonah. Good afternoon, everyone, and thank you for joining us. Our solid results for the first quarter of 2024 reflect the resilience of our business model, even as we are seeing constrained capital spending across the industry, resulting in relatively flat year-over-year revenue after backing out divestitures. Gross margins improved, and consumables recurring revenue reached a record high, reflecting the strong utilization of our existing systems and demonstrating the impact of this revenue stream.
Our customers are using their systems at a high level, displaying a promising indication of their increasing reliance on 3D printing, as they expand usage in manufacturing applications while also managing costs. Our results this quarter and throughout the prolonged capital spending market downturn demonstrate the effectiveness of our strategy that drives high-margin consumables and our unique approach that continues to produce strong results. Specifically, in the quarter, we generated over 7 million of cash from operations and positive free cash flow. We believe that our financial discipline strongly differentiates us in our sector and will help drive increased growth and profit as the current macro capex challenges subside and spending normalizes.
We continue to maintain a healthy balance sheet that provides us stability to manage the current environment, an optionality to support our growth through both organic investments and accretive acquisitions. And when capital spending returns to normal level, our differentiated offering of industry-leading printer technologies, materials, and software solutions positions us to meaningfully accelerate growth, driving sustainable long-term shareholder returns. Now, let me give you an update on our exciting recent technology offering, the F3300, which we launched at the end of last year. As we have shared, the F3300 establishes a new standard in FDM industrial 3D printing for manufacturing with up to twice the speed and throughput of standard FDM systems.
The value proposition continues to resonate in the market with our sales funnel growing. After securing our first buyer, Toyota, we are building on that momentum. BAE Systems, Europe's largest defense contractor, purchased F3300s to drive production improvement and reduce costs and time to market across their air sector products. And our newest FDM technology is perfectly suited to deliver that need.
Sikorsky, a Lockheed Martin company, a world leader in vertical flight, purchased the F3300 to help them to stay at the forefront of additive manufacturing through the production of end-use parts for the aircraft in a faster and more cost-effective way. And Nissan, the automotive OEM, has also become an F3300 customer, where our technology is replacing that of a 3D printing competitor for multiple use cases. Our F3300 pipeline is strong, with accelerating interest and engagement levels. Orders have surpassed our expectations in the first half of this year, and we look forward to achieving and sharing more details on customer wins throughout the year.
We also recently introduced new SAF HighDef printing capabilities with the launch of our H350 version 1.5, which provides additional applications and use cases for a growing set of manufacturing end-uses without compromising speed or quality. Now, I'd like to highlight a couple of milestones subsequent to quarter-end. First, we announced the promotion of our new COO, Amir Kleiner. Amir has been with Stratasys for over 12 years.
And he will now lead the company's global operations, MIS, and quality team, while continuing to manage the customer success team. This appointment will strengthen the connection between the customer success organization and operations and supply chain divisions. Also, post-quarter-end, we proudly published our second ESG and sustainability report. Sustainability is core to 3D printing, with benefits to our customers, employees, people, and the planet.
It's also at the heart of our DNA at Stratasys, as we are clear ESG leaders in our industry. Our achievements include improved environmental impact, employee health and safety, diversity and inclusion, good governance, and ethical conduct. The certifications, processes, and practices we have implemented are a critical component to help cement our leadership role as we partner with some of the largest manufacturing companies in the world. We are an increasingly important part of our customers' journey to decarbonize their operations and optimize supply chains and production.
We invite our investors and customers to join us on the shift to what we call Mindful Manufacturing, where we leverage additive manufacturing technology to produce parts in a more sustainable manner. Overall, we are driving ahead to serve as our customers most trusted additive manufacturing partner and believe we will see meaningfully improved results when the current capex down cycle reverse. To that end, we are continuing to invest in technological innovation, best-in-class sales channels, and key partnerships, building on our meaningful foundations for growth that will drive our industry leadership for the long term. Before I turn it over to our CFO to cover the details of the financial results, let me provide an update regarding our ongoing strategic review.
We continue to run a comprehensive process as our board of directors considers and evaluates all avenues to maximize value. As we have communicated previously, we will disclose further development on the process where we determine that such disclosure is appropriate or necessary. Over to you, Eitan.
Eitan Zamir -- Chief Financial Officer
Thank you, Yoav, and good afternoon, everyone. We are encouraged by multiple improvements in the results of the first quarter, relative to the first quarter of last year, while we continue to experience the effects of macroeconomic weakness in customer capex spending. Despite the relatively flat revenues, our growth margins improved, thanks in part to another record level in our consumables sales. And we generated over 7 million in operating cash and over 4 million in free cash flow.
For the first quarter, consolidated revenue of 144.1 million was down 3.5% compared to Q1 2023. Excluding the noncore divestitures, our revenues were relatively flat. Product revenue in the first quarter was 99.2 million compared to 101 million in the same period last year, or down by 0.9% excluding divestitures. Within product revenue, system revenue was 32.9 million compared to 40.5 million in the same quarter last year.
Excluding divestitures, revenue declined 17.8%. Consumables revenue grew 9.6% to 66.3 million compared to the same period last year. This represents yet another record level for Stratasys and, as Yoav pointed out, signals that utilization rates of the system we have sold continue to be strong. Service revenue, including our Stratasys Direct service bureau, was 44.9 million compared to 48.4 million in the same period last year.
Absent divestitures, service revenue was up 1.8%. Within service revenue, customer support revenue remained at strong levels and was up 3.3% compared to the same period last year, another indication of strong use of our system. Now, turning to gross margins. GAAP gross margin expanded to 44.4% for the quarter compared to 43.8% for the same period last year.
Non-GAAP gross margin also grew to 48.6% for the quarter compared to 47.3% in the same period last year. The improvement versus the prior-year period was driven in part by a greater mix of consumables, higher margins at Stratasys Direct due to divestitures, and better operational efficiency. GAAP operating expenses were 88.4 million compared to 82.2 million during the same period last year. The change in expenses was primarily related to our recent acquisitions, and extraordinary expenses associated with our strategic review process.
Non-GAAP operating expenses were 71.2 million compared to 69.2 million during the same period last year due to the inclusion of Covestro and higher merit costs. Non-GAAP operating expenses were 49.5% of revenue for the quarter compared to 46.3% for the same period last year. Regarding our consolidated earnings, GAAP operating loss for the quarter was 24.5 million compared to a loss of 16.8 million for the same period last year. Non-GAAP operating loss for the quarter was 1.2 million compared to operating income of 1.5 million for the same period last year.
The change reflects the change in overall revenues and increase in opex, offset somewhat by a 4.7 million improvement in non-GAAP cost of goods sold. GAAP net loss for the quarter was 26 million, or $0.37 per diluted share, compared to a net loss of $22.2 million, or $0.33 per diluted share for the same period last year. Non-GAAP net loss for the quarter was 1.7 million, or $0.02 per diluted share, compared to non-GAAP net income of 1.1 million, or $0.02 per diluted share, in the same period last year. Adjusted EBITDA was 4.1 million for the quarter compared to 7 million in the same period last year.
We generated 7.3 million of cash in our operations during the first quarter compared to the use of 17.9 million of cash, from operations in the same quarter last year. After 3 million of capital expenditures, we generated free cash flow for the quarter of 4.3 million. We ended the quarter with 161.1 million in cash, cash equivalents, and short-term deposits compared to 162.6 million at the end of 2023. Our balance sheet remains strong, and we are well-capitalized and well-positioned to identify and capture value-enhancing market opportunities.
Now, let me turn to our outlook for 2024. We expect the ongoing challenging backdrop to most likely persist this year, continuing to cause delayed purchases and longer sales cycles. Based on our first quarter results and current visibility to our end markets, we are reiterating our full year guidance as follows. We are reiterating our expectations of revenues between 630 million to 645 million with sequential quarterly revenue growth, notably higher in the second half.
Given the ongoing softness in customer capital expenditures, we expect the second quarter revenue to show slight improvement sequentially from the first quarter this year and decline relative to the second quarter of 2023. From a gross margin perspective, we continue to expect full year 2024 to be in a range of 49% to 49.5% with improved year-over-year growth in the second half of 2024. We expect our margins to be over 50% next year. In 2024, we expect our operating expenses to range between 292 million to 297 million.
We continue to expect non-GAAP operating margins between 2.5% to 3.5% for the full year. We anticipate a GAAP net loss of 88 million to 72 million, or $1.24 to $1.01 per diluted shares, and non-GAAP net income of 9 million to 14 million, or $0.12 to $0.19 per diluted share for the full year of 2024. Adjusted EBITDA is expected to be in the range of 40 million to 45 million for the year. Capital expenditures are expected to range between 20 million to 25 million for the year.
And finally, for the full year, we continue to expect positive cash flow from operating activities. The second quarter will not generate positive operating cash flow due to certain quarter-specific costs, but we expect to see a reversal back to positive operating cash flow in the second half of the year. With that, let me turn the call back over to Yoav for closing remarks. Yoav?
Yoav Zeif -- Chief Executive Officer
Thank you, Eitan. In summary, we delivered another solid quarter in a persistently challenging environment. The strength of our system sales in past periods flows through our results today in the form of consumables. As our customers continue to heavily utilize previously purchased systems, we expect that those systems will be replaced with higher performance, more advanced offerings in the coming years.
The investments we are making to drive innovation and greater capabilities in additive manufacturing mean that we will be ready to meet those needs when the cycle turns. We are laser-focused on our commitment, to delivering differentiated products and solutions, to customers across a wide array of use cases. That, coupled with our relentless focus on execution, is setting the stage for us to drive relative outperformance and enhanced shareholder value. With that, let's open it up for question.
Operator?
Questions & Answers:
Operator
[Operator instructions] Our first question comes from Troy Jensen with Cantor Fitzgerald. Please state your question.
Troy Jensen -- Cantor Fitzgerald -- Analyst
Hi, gentlemen. Congrats on the good results here and positive cash flows.
Yoav Zeif -- Chief Executive Officer
Thanks, Troy.
Troy Jensen -- Cantor Fitzgerald -- Analyst
Maybe first off, for Eitan -- you're very welcome. First here for Eitan, a couple questions. I guess, could you talk us about Q2 seasonality? And you guys finished two months through the quarter now, so would you expect normal seasonality in Q2? And then on top of that, are we going to see incremental revenues from the F3300 here this quarter?
Eitan Zamir -- Chief Financial Officer
Thank you, Troy, for the question. So, we expect a slight increase compared to Q1. So, there is, in that regard, a normal seasonality of Q2 being better than Q1. However, the macroeconomic situation is still creating some headwinds in the short term.
And with respect to the F3300, what was again the question?
Troy Jensen -- Cantor Fitzgerald -- Analyst
Is it going to be initial revenues in Q2? I guess I'm trying to think base business. Is that going to be seasonal or seasonality? And then, is the F3300 going to be incremental to that?
Eitan Zamir -- Chief Financial Officer
Yes, there is going to be -- we expect revenue in Q2 but much more significant in the second half of the year.
Troy Jensen -- Cantor Fitzgerald -- Analyst
OK. Perfect. So, I'd love to get a third question. I got one more here for Eitan.
I want to do a follow-up for Yoav. But, Eitan, long-term deferred revenues, they've been down a couple quarters in a row now. You know, I'm guessing that's just, you know, multi-year service contracts. But can you just touch on why long-term deferred revenues, I mean, turning the wrong direction?
Eitan Zamir -- Chief Financial Officer
There is no specific trend. It's sometimes a mix of the number of years of contract, so there is no specific reason or trend.
Troy Jensen -- Cantor Fitzgerald -- Analyst
OK. All right, that's fine. All right. Now, Yoav, for you, this quarter was interesting, right? You guys reported two weeks later than normal, and there is just kind of a lot of chatter about consolidation.
And, you know, I personally believe you guys had a lot of executives out in Barcelona. We're expecting to hear more about, you know, the strategic review update. So, I know you kind of touched on it briefly on your prepared remarks, but is there any more color, you can talk about here about when you guys plan to really kind of do something on the strategic review?
Yoav Zeif -- Chief Executive Officer
Well, on the late report of the quarter, it's a fairly logistic issue. Scheduling some resources that are attached to the war, but nothing really important and nothing that really impacts our operations. As for the strategic review, you know, we are precluded from sharing any details. What I can say on the strategic review is that we are engaging, we are making progress, and, of course, we will update when it will culminate.
Troy Jensen -- Cantor Fitzgerald -- Analyst
All right. Understood. Good luck, guys.
Operator
Our next question comes from Greg Palm with Craig-Hallum. Please state your question.
Danny Eggerichs -- Craig-Hallum Capital Group -- Analyst
Yeah, this is Danny Eggerichs on for Greg today. Thanks for taking the questions. Maybe just as we kind of think about the last time we talked a few months ago, obviously, the macro remains challenging. But any kind of change on how you're seeing maybe overall visibility, sales cycles continue to elongate or kind of stay the same? Any color you can give us, that would be great.
Eitan Zamir -- Chief Financial Officer
Great question. Thank you for asking. So, we are more or less in the same situation like last quarter. There was an improvement in the sales cycle at -- not a real improvement, as I said last quarter, but we saw the second derivative kind of getting lower, so stabilizing.
There is -- the sales cycles are stabilizing. We don't see yet the breakthrough, but it's there. If I base it on our engagement with our customers, where most of the engagement now are led by the new -- the NPIs, the new products led by the F3300, there is an appetite in the market. It's clear.
But on the other hand, all the large customers, and we are focusing on the high end, they are holding their capex. There is a capex constraint, but, you know, it can go so far because at the end you have new models, you have new drones, and the demand is there. And we are using this time where we are also stable, by the way. We did not decline.
Year over year, we are flat in a very challenging market. We increased our market share in the last three years. So, we are stable, and we are using this time to make sure that, we are ready to gain more market share and to fulfill more demand that is out there and just waiting that someone will address it. And we have the growth engine in place for this.
So, no doubt that there is a macro pressure still out there, but we are working on our micro factors to make sure that we will be the one ready to keep on living in this industry.
Danny Eggerichs -- Craig-Hallum Capital Group -- Analyst
OK, makes sense. And maybe just touching on consumables. Obviously, really good in the quarter again, sounds like printer utilization remains pretty strong. I guess, how did -- or what kind of contribution did Covestro make to that business in the quarter? And I guess should we expect that that business continues to grow sequentially as we move throughout the year? How should we think about that?
Eitan Zamir -- Chief Financial Officer
Thank you for the question. So, Covestro, as we discussed in the past, Covestro levels are 4 million to 5 million a quarter. And Covestro itself -- so the growth was both Covestro and organic growth and better utilization of our printers which something that creates a lot of confidence for the future.
Yoav Zeif -- Chief Executive Officer
Maybe I can add here, if I may. Consumables for us is focused because we believe that consumables will allow us to accelerate the adoption of additive manufacturing because it opens up new applications. So, we are very proud in our consumable performance. Growth, year over year, with and without Covestro, we observe higher utilization.
And practically, in FDM, we have record high of utilization across the board. We increased our manufacturing install base step by step by step, even in tough times. And all this together will make sure that this trend of selling more consumable and keeping and even increasing the share of consumable out of our total revenue will be there for a long time. And this is the strength of Stratasys.
Danny Eggerichs -- Craig-Hallum Capital Group -- Analyst
OK, great. Thanks. I'll leave it there.
Operator
Our next question comes from Brian Drab with William Blair. Please state your question.
Brian Drab -- William Blair and Company -- Analyst
Hi. Thanks for taking my questions. And I just wanted to talk a little bit more about consumables because the step-up sequentially from the fourth quarter to the first quarter really is catching my attention. And I'm just -- it's a significant step-up.
And, you know, can you talk a little bit more about what's driving that? Are you surprised that you saw that, you know, in this kind of tougher environment that you saw that step-up from a fourth quarter to a first quarter? And also, you know, is the 3300 and the consumables usage, which is significant with that, potentially going to, you know, continue the momentum here in consumables?
Eitan Zamir -- Chief Financial Officer
Thank you, Brian. So, maybe first, with your first question. So, to your point, when you look on the trend for the last three or four quarters, and I'm talking about the trend after the acquisition of Covestro, when you think about Q2 2023 onwards, we're up from 60.8 to 61.8 to 63 in Q4, as you mentioned, and then to 66.3 million this quarter. That, to Yoav's point from earlier, demonstrated the higher utilization, and that creates confidence.
So, we have confidence in our ability to achieve levels above 63 million. But, you know, sometimes where every quarter land in this range, between maybe 63 to 66, it also depends on specific deals. So, to your question, we do see the trend is a positive trend. We believe we can achieve higher than 63 during 2024 quarter.
But sometimes, you know, the specifics can move somewhere within this range. Hopefully it helps.
Brian Drab -- William Blair and Company -- Analyst
OK. Yes, that's helpful. And then, yeah, on the 3300, I guess, is my follow-up. What is the consumables usage, attach rate, or usage relative to other machines?
Yoav Zeif -- Chief Executive Officer
Maybe I can help here. F3300 was designed and targeting manufacturing with large parts. So, what is unique for those machines, is we are talking about high-performance materials. We are talking about high consuming of high-performance material because those are large parts, and those machines are running in very high utilization.
It's the same like our F900. We have machines that are running 90% and 95% utilization, which is much higher than any prototyping machines that we have that can be around 10%, 15%, this range. So, I'm very optimistic because this is designed for manufacturing, and it's coming with our high-end materials.
Brian Drab -- William Blair and Company -- Analyst
Got it. OK. Thank you very much.
Operator
Thank you. And our next question comes from Jacob Stephan with Lake Street Capital Markets. Please state your question.
Jacob Stephan -- Lake Street Capital Markets -- Analyst
Yeah. Hey, guys. Congrats on the results.
Yoav Zeif -- Chief Executive Officer
Thank you.
Jacob Stephan -- Lake Street Capital Markets -- Analyst
I just wanted to get some clarity on a comment, Yoav, you made earlier in the prepared remarks. You kind of mentioned that orders had surpassed expectations so far in the first half of the year. I mean, maybe you could just provide a little clarity on, you know, is that the base business, or is that just the F3300? Any color there would be helpful.
Yoav Zeif -- Chief Executive Officer
Jacob, thank you. It's an opportunity to clarify. I related to the F3300. Of course, like every time that we are launching a new product, we have a plan, and we are on plan and exceeding it with the F3300.
Of course, there is a ramp-up, and the ramp-up is starting at age one, but we'll culminate at age two. So, that's what I meant. And we are definitely surpassing in terms of purchase orders and in terms also of the quality of the customers because we have Nissan, we have Sikorsky, we have BAE, we have Toyota. And this is something that creates this flying wheel effect that we are looking for because if they can use it for end-use parts, also others will use it for end-use parts.
Jacob Stephan -- Lake Street Capital Markets -- Analyst
Yeah, that -- understood. And then, so I mean, you do have these, you know, nice blue-chip customers, but maybe you could kind of talk about some of the mid-market opportunity that you're seeing with the F3300, maybe some of those companies that don't have the, you know, balance sheet that these large customers do. I guess, what traction are you kind of seeing there?
Yoav Zeif -- Chief Executive Officer
We are seeing traction in the mindset that FDM can run -- also in the mid-market, can run application, pure manufacturing application. Because this machine has doubled the speed and almost doubled the throughput at almost half the cost. So, it's a disruption in the high-end, large part FDM market.
Jacob Stephan -- Lake Street Capital Markets -- Analyst
OK. Got it. Thank you.
Operator
[Operator instructions] Our next question comes from Alek Valero with Loop Capital Markets. Please state your question.
Alek Valero -- Loop Capital Markets -- Analyst
Hey, guys. It's Alek on for Ananda. Congrats on the results.
Yoav Zeif -- Chief Executive Officer
Thanks.
Alek Valero -- Loop Capital Markets -- Analyst
My first question is, have you guys seen any notable changes in the conversation at home with customers? And if so, what kinds of things are they focusing on?
Yoav Zeif -- Chief Executive Officer
That's a great question. I would say that the level of engagement that we have is much more specific. And I'm very proud with my team as well that we are not anymore talking high-level 36,000 feet. We are talking about what is the application? What are the requirements? How we work together with our customers to meet those requirements? This is the only way to get those blue-chip customers.
It's the only way. And I think this change in mindset also happening within Stratasys. So, it's a different level of engagement than three years ago and four years ago when I joined Stratasys because we are talking about real requirements. We are talking about, what do we need to meet? What type of standards? We are working with the right institutions.
And customers, when you do that, start to understand the benefit of additive manufacturing. And the benefit is very clear. Of course, it's different from each application. For each application, it's completely different, but it's there.
And we are not trying to compete on the injection molding part. We are trying to compete where we have absolute advantage on personalization, on lightweight, on specific geometries, and so on and so forth. And the customers are with us on this journey.
Alek Valero -- Loop Capital Markets -- Analyst
Very helpful. As a quick follow-up, what are some -- what are the more notable things industry and company-wise that we should all be focusing in on in the second half of 2024?
Yoav Zeif -- Chief Executive Officer
That's a great question. Thank you. I think we should focus on how the additive manufacturing industry can deliver real value. So, talking about the promise, talk about specific applications, and how we can deliver value to specific applications.
And this is a combination of the reliability of the machine, the TCO, the total cost of ownership of the part. It's a matter of materials. How good are the materials? It's related to the software and how we can help the customer be successful, along the digital trend with our software. And that's exactly what we are doing.
The moment the industry will be there, it's only a matter of time. And I know that, today, the industry is kind of depressed because of the macro condition, because that we are in a transition crossing the chasm. But we have absolute advantages, and we are going to deliver them. And that's the way to analyze or to judge each one of the player.
Do you have the fundamentals to deliver the value? And I think that Stratasys has the fundamentals. We are leading with a lot of stability, financial stability. It's very important to the customers, by the way, to see the discipline and to understand that there is someone there, a partner in additive that can take the journey with them for many years to come with the right fundamentals, with the portfolio, with the go-to market, with the service, with the software, with the material portfolio. That should be of the focus.
Not about promising, about delivering.
Alek Valero -- Loop Capital Markets -- Analyst
Very helpful. Thank you, guys.
Operator
Our next question comes from Jim Ricchiuti with Needham and Company. Please state your question.
Chris Grenga -- Needham and Company -- Analyst
Hi. Good afternoon. This is Chris Grenga on for Jim. With respect to systems that were shipped in the quarter, are the customers replacing existing systems are expanding existing fleets? Or are they new to 3D printing? Or is there any breakout that you would call attention to there?
Yoav Zeif -- Chief Executive Officer
It's a combination. Thank you, Chris, for the question. It's a combination. And by the way, this is another thing that kind of helped us.
I wouldn't say tailwind, but we have such a large install base of, I will say, almost 40,000 machines out there. So, even in tough times, we always have those customers, the loyal customers, that we can sell another Stratasys machine even in tough times because they trust us. We don't need to prove ourselves. But it's a combination.
And we are giving a lot of attention to maintain the happiness of our install base. But at the same time, we are crossing the chasm into manufacturing, and we are hunting for new logos. But back to your question, it's a combination.
Chris Grenga -- Needham and Company -- Analyst
Got it. Thank you. And then, just with respect to the outlook, does it assume no incremental change with respect to customer capex patterns that you've observed so far? Or is there any change that is embedded in the outlook?
Eitan Zamir -- Chief Financial Officer
Chris, the outlook is based on what we see now and the outlook that we currently see for the second quarter and the second half of the year.
Chris Grenga -- Needham and Company -- Analyst
Got it. Thank you very much.
Operator
Thank you. And, ladies and gentlemen, there are no further questions at this time. I'll hand the floor back to Yoav Zeif for closing remarks. Thank you.
Yoav Zeif -- Chief Executive Officer
Thank you for joining us. Looking forward to updating you again next quarter.
Operator
Thank you. This concludes today's conference. [Operator signoff]
Duration: 0 minutes
Call participants:
Yonah Lloyd -- Vice President, Investor Relations and Chief Communications Officer
Yoav Zeif -- Chief Executive Officer
Eitan Zamir -- Chief Financial Officer
Troy Jensen -- Cantor Fitzgerald -- Analyst
Danny Eggerichs -- Craig-Hallum Capital Group -- Analyst
Brian Drab -- William Blair and Company -- Analyst
Jacob Stephan -- Lake Street Capital Markets -- Analyst
Alek Valero -- Loop Capital Markets -- Analyst
Chris Grenga -- Needham and Company -- Analyst
